Repairs To Upvc Windows Is The Next Hot Thing In Repairs To Upvc Windows
Repairs To Upvc Windows Is The Next Hot Thing In Repairs To Upvc Windows
Blog Article
Repairs to uPVC Windows
uPVC windows are a great choice for modern homes. They are durable, long-lasting and easy to maintain. They do not decay or rust as aluminum and timber.
Cleaning and lubricating regularly UPVC windows and doors is essential. This will reduce repair costs as well as improve energy efficiency.
1. Broken Glass
If the glass in your window is damaged, it can cause a huge amount of damage to your home, making it very hazardous and possibly fatal. It is important to take the time to ensure that you're doing all you can to keep your windows in good repair.
Single-pane windows are fairly simple to replace and typically fit into old frames very easily. However, if you have double pane windows that are secured by internal beading, it'll be more difficult to remove the existing panes and install new ones. In this case you'll need locate some plastic spacers to aid the new pane in being able to fit properly into the frame of the window.
If you plan to attempt to remove the glass panes yourself it is important to wear the proper safety gear, including thick gloves and eye protection. It is also recommended to lay down a dropcloth prior to you begin working on the window panes to ensure that any shards of glass fall onto the fabric and not on the floor, where they could be trampled.
Once the glass has been removed and the glass is removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to prevent water and drafts from getting into the home until a professional is able to come out and repair the window. This will also act as a barrier, deterring any intruders to gain access into your home. If the gap is large, you may be interested in the security door with an integrated window as it offers the best of both worlds.
2. Sagging
Upvc is a long-lasting energy-efficient, cost-effective and economical alternative to timber sash windows. As time passes, they may develop a number of problems, including sagging. A sagging window can cause problems with light, draughts, and even security. It's crucial to act as soon as you discover that your uPVC windows are sliding.
Repositioning the hinges could aid in fixing a window that is sliding. First, you'll need to unblock the windows to get at the frame. Then, remove both the top and bottom hinges using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. Close your window to check the fit after having moved your hinges. If you're satisfied with the fit, tighten the screws until they stay in place.
If you can't reposition the hinges, you might need to replace the seal. Rubber seals may dry out and lose their elasticity with time, leading them to loosen. It is essential to replace your seal as soon as you can in order to keep your uPVC window watertight and draughtproof.
UPVC handles can also become loose. This is often caused by screws that have loosened over time, but it can also be due to the handle mechanism wearing out. Luckily, it's not difficult to fix the handle of a window that is loose yourself. First, you'll need close your window and do a test to ensure that it fits. The corner joints of the sash need to align with the casing joint. If it doesn't then you can use a screwdriver or a wrench to loosen the handle, and then turn the mechanism back into its original position.
3. Water Leaks
If you awake to wet floors and damp walls each time it rains, it is important that you take action. Water leaks through windows can cause structural damage to your home, and affect your ability to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.
This is a simple fix that can be done by any DIYer who is competent. Depending on the severity of the issue is, old caulking may need to be removed. It is crucial to keep in mind that when it comes to uPVC window repairs, do not be tempted to apply too much caulk in order to make the area more difficult to clean and could reduce the efficiency of your energy.
Make sure that the drainage holes have no debris in them, and also that the sill pan has been properly angled to drain away from the window. In more serious situations, you might need to consider replacing the window.
Other indicators of water leakage include rotted sills and the appearance of black spots of mold on the walls near the window. The fungus thrives in damp conditions and can spread quickly throughout the home.
It is also important to remember that if the leak originates from the glass of your double-glazed windows it may be more likely to be an issue with the glass seal rather than the frame or sagging. It is also possible to be corrected by a uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.
4. Faulty Hinges
Hinges could be at fault when your uPVC window is difficult to open or if it opens with an ease. They can be repaired by any DIYer who is skilled and are usually done within a few minutes.
Most households in the UK will have top-hung or side hung uPVC windows that are hinged and, just like any mechanical component they are susceptible to wear and tear over time. The process of replacing a hinge on a window is an easy procedure, but it is simpler if you have someone to assist in holding the frame up.
It is also important to verify that the uPVC hinges are opening and closed in the correct direction. You can do this by checking for the arrows on each hinge, this indicates which way the window should be opened.
Window hinges that aren't working properly could be the result of incorrectly opening the window in a particular way or by improper installation in the factory. This can often be resolved by sending us a photo through our website and we will be pleased to offer you suggestions.
Regular lubrication of hinges is also essential. This can be done by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can help the window to open and close more easily. It can also prevent corrosion and reduce the risk of sticking. This should be done at least every year. WD40 and other solvent based fluids are not recommended since they can damage the parts of your uPVC window.
5. Draughts
Draughts in Upvc windows can be caused by different things. The hinges, also due to wear and tear can become misaligned, this causes an opening to appear where the sash meets the frame. If they're beyond repair, it might be necessary to get them re-aligned. The interlock, which is located on the hinge of the window and can also be misaligned, and again it may be possible to just give them a clean but in some instances it could be necessary to have them replaced.
The next common cause of draughts is the window seals. These are prone to wear or damaged over time and will allow air to escape through the gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity glass. This will get more info help control indoor temperatures and lessen draughts.
The last way to reduce the amount of draughts is to use a draught-excluder. These are usually fabric tubes filled with a filler that can be hung over your window sill. They can keep your home warm by blocking cold air.
With a little regular maintenance and repairs your windows made of upvc will continue to provide excellent security and insulation for your home. It is crucial to recognise that all windows have a life span and they may reach an point at which it is more economical to replace them than fix them. If you encounter any issues with your window made of upvc it is recommended to speak with a professional as soon as possible.